To renovate or repair a wall, plastering is a necessary step as it helps to give the wall an all-new look. However, before plaster can be applied to the wall of your house in London, the professionals will need to prepare it and today; we will discuss the steps involved.

So, without further delay or focusing on plaster quality, let us start with the topic right away.

• Wall Inspection

As you can guess already, before repairing or renovation, an initial inspection will always be carried out by the professional plasterers in London. In the inspection, the plasterers will determine the condition of the wall and the tools and materials that will be required to give it a smooth finish.

The professionals will also take the measurements of the walls and depending on the repair and renovation they will gather the necessary materials before starting the repairing or renovation service.

• Stripping Existing Wallpapers

If the wall has existing wallpaper, the professionals will need to strip off the wallpaper using various tools and they will have to carry out the job attentively to make sure that the entire wall looks wall.

This can be a time-consuming job depending on the type of wallpaper that was installed and unless the wall is fully clean, the professionals cannot proceed to the next step. At the same time, during the removal of the existing wallpaper, the professionals will need to make sure not to cause any damage to the walls.

• Cleaning the Walls

After removing all the existing wallpaper, the professionals from the plastering company in London will clean the walls to make sure that they are free of dust, grime or grease. The cleaning process is important because it can directly affect the plastering that will be applied.

For the cleaning process, the professionals will use cold water and conventional cleaning tools and after completing the cleaning process, they will let the wall dry before they can move to the next step.

• Fixing the Cracks and other Damages on the Walls

Now, the wall is clean, but the preparation is not yet complete. The professionals will need to check the integrity of your wall and if there are any cracks or loose plaster because a weak wall will not be able to hold the plaster.

So, to repair the cracks and other damages that might have caused due to ageing or weather effects, the professionals will fill up the areas with a bonding material and for fixing the holes, the builders will use fillers. However, if the walls are severely damaged, they will attach fresh plasterboard.

• Applying Scrim Tape

Even after filling or applying to bond, some cracks can still remain. So, to fix them up, the professionals providing plastering services in London will apply scrim tape on the areas that still have cracks.

The reason behind applying the tape is that it helps to keep the plaster intact and prevents the reappearance of cracks.

• Applying PVA Glue

Finally, the plasterers will apply PVA glue on the wall as plays the role of a primer. Also, it is applied by the plasterers because it prevents the walls from capturing too much moisture and results in achieving a smooth wall finish.

So, by following these steps, the professionals make a wall ready for plastering and establish the look that you want.

Enhance the Aesthetics of your Interiors – Contact us now

Are you searching for local plasterers in London? We at A&G Construction London Ltd house the most experienced plasterers to transform your interiors. So, to book now, get a quote or to solve your queries related to our services, contact us now.